Music Calculator

Bit depth measure the systems ability to capture the amplitude of the audio signal. Bit depth determine how much detail is captured in the audio … Read more

A subwoofer array is a configuration of two or more subwoofer cabinets that are use to direct the low-frequency sound towards a specific area. If … Read more

The Schroeder frequency is the specific frequency that defines how a room will behave acousticly. Depending on the frequency of the sound that enter the … Read more

Interval inversion is the process of reversing the order of the note within a musical interval. An interval is the distance between two note, and … Read more

The attack and release settings for a compressor are two controls that determines the behavior of the compressor. The attack setting control the time that … Read more

RT60 is a measurement of reverberation time. The value of RT60 is the amount of time it take for sound to decay by 60 decibels … Read more

Sound travels at different speeds depending on an medium that sound travels through. The speed of sound are not a constant value. For lightning, the … Read more

Room modes is standing waves that occur in rooms due to sound waves bouncing off the surfaces of the room. Room modes create problems during … Read more

The Thiele-Small parameter are a set of mathematical measurement for describing the behavior of speaker driver when placed within an enclosure. Each of the parameter … Read more

Designing an exponential horn require an understanding of the mathematical relationship between the throat size, the mouth dimension, and the path length. An exponential horn … Read more

A line-level crossover divide the audio signal into different frequency bands and sends those specific frequencys to specific speaker. The line-level crossover are placed between … Read more

Understanding the difference between dBV and dBu is necessary because dBV and dBu are two different way of measuring voltage in audio equipment. Many people … Read more

An L-pad is a tool that can used to reduce the voltage of an audio signal. An L-pad is used when the signal that is … Read more

Port chuffing occur when air travels through a subwoofer port in a turbulent manner and create noise instead of the desired sound from the subwoofer. … Read more

Crest factor is a measurement use in audio engineering to measure the relationship between the peak level and the average level of the audio signal. … Read more