One thing is being able to play the guitar well, and another is being able to play the tones as precisely as one wishes. Both of these things are possible.
However, you will also need to be especially careful about the output arrangement you are utilizing to ensure that you do not have to deal with any issues related to sound crackling, clarity, and other issues while playing an instrument.
A tremendous lot of importance is placed on the output hardware. In addition to this, you will unquestionably need to exercise extreme caution while selecting the devices to be used for the output of musical instruments.
One such musical system that you can get to enjoy a perfect experience with whatever your needs might be is the Harbinger HA120, and you will be getting perfection on all fronts regardless of what instrument you might be looking to play on the system.
You can get this perfect experience by purchasing the Harbinger HA120. This is because it is made to pick up any tone that you might be playing, and once it does so, you can rest assured that you will have the appropriate experience.
However, there are certain aspects that you need to pay extra attention to, and the Harbinger HA120 has also been rumored to have a few widespread issues.
Because of this, if you are interested in acquiring it to fulfill your musical requirements, there are a few considerations that you will need to give careful attention to.
Dealing With Harbinger HA120 Problems
You might be facing some problems with your Harbinger HA120. Listed below are some common issues that have been reported in these speakers.
There are easy and simple solutions to most of the problems. Keep on reading to know how to deal with some common issues.
1. No Sound on Speakers
There will be instances when it will seem as though the speakers are not producing any sound at all.
Checking the connections and ensuring that the speakers are correctly connected to the amplifier should be the first thing that comes to your mind when there is a problem with the sound.
If the issue persists, you will need to inspect the cables, after which you will need to re-connect them in the correct manner. This should be enough to solve the issue for you.
However, if it does not work out for you and you are still encountering the same problem, you will need to verify the microphone’s location. =
If the microphones are placed directly in front of the speakers, you may experience ultrasonic feedback from them, which is audible only to those with very acute hearing.
This could cause your device to overheat, which would result in the speakers becoming inoperable.
In light of this, all you have to do is check to see that there is not such a problem with the positioning of the mic, and you ought to have the music coming through your speakers in no time at all.
2. Overheating
The second most common problem that you could experience with the Harbinger HA120 sound system is the overheating problem. This problem is not only prevalent, but you also do not have any way to get rid of it.
If your system is getting too hot, the only thing you can do is shut it down for a while and let it cool down, and that should be enough to solve the problem for you.
After you have made sure that the system has returned to its average operating temperature, you can continue to use it in the same manner as before. After that, you won’t have to be concerned about a single problem at all.
Just make sure that you are not playing the system for extended hours without noticing because overheating can also destroy some of the internal components, and that will be a huge mess for you to deal with.
3. Speakers Getting Bad
You will need to be careful regarding the speakers because they are prone to malfunctioning at times, which will make the entire output experience difficult for you to enjoy.
The reason for this is relatively straightforward: as your speaker ages, it will gradually lose its strength, and in extreme cases, it may even burst as a result of overheating.
Individuals interested in using some studio’s sound system for ongoing jam sessions or practice sessions should be concerned about this aspect of the system.
The only solution to this issue is to get the speakers checked out and correctly diagnosed, which is the only way to do so.
An authorized technician will be able to assure that you can acquire the ideal answer to your problem without having to worry about a single thing. They may require some repairs or, on occasion, replacement.
In addition to this, it will ensure you that your warranty will not be voided, and it will also provide you peace of mind with regard to the various aspects of safety that are involved at the same time.
4. Fuse Problems
It has been brought to our attention by a number of users that the fuse of one of the speakers has abruptly blown. There are perhaps two primary explanations behind that.
You may have purchased a fuse that is close to the correct one but not quite the right one, or there may be a problem with the amplifier itself.
There may be a method of troubleshooting that you can attempt before taking it in to be fixed professionally.
Be sure that the fuse rating you use corresponds to the one recommended for the power output of the speakers. Also, avoid using a fuse with a rating more excellent than the recommended one.
If you do, you risk damaging the speakers and all of the components that come after the fuse. It prevents the other parts from overheating.
It’s not often that fuses simply explode. In certain cases, you might get lucky, and the amplifier will continue to function, but the fuses will blow because of a serious component problem.
The problem won’t fix itself if you just replace the component. Even if it works for a while, there is a flaw that may manifest itself again at some point.
Always use a fuse with the same rating and type as the one you are replacing. The solution is immediately apparent if an exact match causes the fuse to blow.
You already have a blown speaker, and trying to repair it by inserting additional fuses will simply make the speakers more damaged in the long run.
The majority of the fuses in such goods are of the Slo-Blow variety. These fuses can withstand transients, such as when the power is first turned on, and will not explode as a flash bulb would. They have to observe a continuous short in order for it to blow.
When power transistors become overheated, they can cause a short circuit, which blows the fuse that protects the power supply. Under no circumstances should you use a fuse with a more excellent value.
You will fry the power supply as well (assuming you haven’t done so already), and you will very likely have to fix both the outputs and the supply, which will cause your repair prices to quadruple easily.
The Bottom Line
So, now you probably have the solution and know how to deal with the above-listed problems. Harbinger HA120 is one of the most remarkable musical systems you can have. Don’t worry if you encounter some issues with it.
Follow the solutions explained in this article, and you’ll be able to deal with the problems yourself. If you feel like you can not handle the problem, it is always recommended that you consult an expert technician so that you can get the right solution.
The nut for the speaker input on back of mixer wiggled off..the insert housing is inside of mixer. But I can’t get the back of the mixer off to fix.. help.
The unit is not powering on. The blue light is not coming on when powered on and the fuse checks out to be okay. The mixer has been stored for a couple of months. Prior to storing, owner ran his cell phone through the mic line in playing music, could this have burnup the a
PA system?