Cents Off From Equal Temperament Calculator

Cents Off From Equal Temperament Calculator

Compare a measured pitch, just ratio, Pythagorean interval, meantone flavor, or custom temperament against the 12-tone equal-tempered frequency for the same note.

🎯 Tuning Deviation Presets

Cents formula: cents off = 1200 x log2(actual frequency / equal-tempered frequency). Positive values are sharp of 12-TET; negative values are flat.

Pitch And Temperament Inputs

Used for interval-based tuning systems.
Scientific pitch notation; C4 is middle C.
Changes the 12-TET target grid.
The equal-tempered comparison note.
The target note's octave.
Choose how the non-ET pitch is supplied.
Used when the source is measured Hz.
Used for calculated actual pitch.
Accepts 3:2, 5/4, or 1.5.
Useful for tuner readings or synth cents.
Sets the action message sensitivity.
Controls Hz and cents rounding.
Cents Off 12-TET
0.00 c
locked to equal temperament
Actual Frequency
440.00 Hz
measured or temperament pitch
Equal-Tempered Target
440.00 Hz
A4 reference 440 Hz
Tuning Action
Hold
within threshold

Calculation Breakdown

Target note and MIDIA4, MIDI 69
12-TET formula440 x 2^0 = 440 Hz
Actual pitch sourceMeasured frequency
Frequency ratio actual / ET1.000000
Cents formula1200 x log2(1) = 0 c
Beat estimate against ET0.00 beats per second

📌 Current Deviation Cards

0.00 c
cents off

Positive is sharp and negative is flat against equal temperament.

1.0000
frequency ratio

The actual pitch divided by the equal-tempered target.

0.00 Hz
hz difference

The direct frequency gap between both pitches.

Hold
tuning action

Action is based on the selected in-tune threshold.

🎼 Temperament Comparison Grid

📊 Cents And Frequency Tables

DeviationFrequency RatioAt A4Typical Reading
+1 cent1.000578+0.25 HzTiny fine-tuning change
+5 cents1.002892+1.27 HzClearly visible on tuner
+10 cents1.005793+2.55 HzNoticeably sharp in exposed unison
+25 cents1.014545+6.40 HzQuarter-semitone color
+100 cents1.059463+26.16 HzOne equal-tempered semitone
Equal-Tempered NoteHz at A4 440+5 c Hz-5 c Hz
Temperament IntervalRatio or SizeCents From ETWhere It Matters
Pure perfect fifth3:2+1.955 cStrings, voices, drones
Pure major third5:4-13.686 cJust major triads
Pure minor third6:5+15.641 cJust minor triads
Harmonic seventh7:4-31.174 cBarbershop, brass color
Pythagorean major third81:64+7.820 cFifth-built tuning
Quarter-comma fifth696.578 c-3.422 cMeantone keyboards
Tuner ReadingMeaningFrequency MovePractical Choice
Within 2 cVery closeSmall trimUsually leave for ensemble
3 to 5 cAudible in unisonFine adjustTune if exposed or sustained
6 to 12 cObvious colorCorrect or chooseDecide if temperament is intended
Over 15 cStrongly alteredLarge correctionUseful for pure thirds and sevenths

💡 Tuning Tips

Match the reference first. A4 at 440 Hz, 442 Hz, 432 Hz, or 415 Hz changes the equal-tempered target before any cents comparison begins.
Separate error from intention. A pitch that is 14 cents flat may be wrong for a piano unison but right for a pure major third in just intonation.

In a recording session you might hear that a vocal track doesn’t sound quite right in combination with a piano. It’s not a timing problem and it’s not a poor performance. By all accounts on a digital tuner it is a technicaly correct note, but it produces a slight, grating unpleasantness as it clashes with the instrument. That is the ‘friction point’ between equal temperament and the physical nature of sound waves.

Using the cents off from equal temperament calculator allow you to pinpoint exactly how many cents away from true equality the pitch are moving. It turns what had been a vague sense of ‘not right’ into something specific: a number.

What Are Cents in Music Tuning

The octave has been divided equally into twelve perfectly equal half steps called equal temperament. This is a great compromise, meaning we can now perform music in any key without needing to retune our instrument. What we lose as a result is purity.

If you sustain a perfect fifth, which comes from the simple frequency relationship of harmonic series (3:2), then you’ll notice that it’s ever so slightly sharper than an equal-tempered fifth on your piano. It’s only about two cents apart, but that difference are enough to cause beats if the note is held.

Run calculations through the calculator above and it will compare your selected temperament, or frequency that you have measured against the strict grid of 12-TET to expose these underlying differences. Understanding what the figures represent is more important than just seeing them.

A cent equals one-hundredth of a semitone. In isolation, you would struggle to hear if there was a variation of two cents. If, however, you had two instrument playing the same note together then even a variation of five cents sound distinctly noticeable as a beat or waver.

The reason for including a threshold is because you can set it yourself to decide how much ‘out-of-tune’ is tolerable given your situation. For example, the human voice in a choir may tolerate a ten-cent variation without losing its sense of warmth in harmony. In contrast, a single violinist performing a solo may need to be precise within a variation of only two cents.

You can play around with different ideas of tuning, without having to get out a physics degree. For example, you can choose a pure major third (and you’ll instantly discover that it’s around fourteen cents flat from the equivalent on the piano). That accounts for how just intonation has been described as sweet in static chords, yet painful if you modulate into another key. The calculator demonstrates this in real time.

If you’re exploring some of the historical tunings, like quarter-comma meantone, then the option to insert your own ratio allow you to experiment. Here, the tool becomes a theoretical sandbox.

Before starting to perform a particular tuning system, check first if it suits your composition. Every note is right when played in context. Every note has its place and is determined by the music’s time period, the acoustic environment, and the instruments available. Performing baroque music on a harpsichord could well mean setting a lower pitch standard that alters the whole reference grid.

You can set the A4 reference to anywhere between 415 Hz and 442 Hz in the calculator. That alters the target frequencies for all other notes so your cent values are based off the actualy standard in use. This is easy to miss. However, comparing a piece performed using 415 Hz against a 440 Hz grid is going to give huge errors that bear no relation to anyone’s intonation ability.

Tuning isn’t so much a matter of achieving perfect notes but more one of relationships between those notes. It’s about ensuring that the important notes sounds good with as little unwanted beat as possible, while allowing for more freedom in others.

Whether you’re studying an elaborate orchestral texture, tuning your guitar by ear or intoning a drone string, a knowledge of how far out each note deviates in cents provides you with a common language through which you can discuss pitch. It takes away the guesswork from what was once something we intuitively knew. Now you know what you’re hearing, you can measure that roughness in numbers and then determine whether it’s a colour to embrace or an error to correct. And this is where having gone through all of this really should of pays off.

Cents Off From Equal Temperament Calculator

Leave a Comment